Roland Edirol UM-1X Mode D'emploi page 9

fig.2-1e
3
Click the Hardware tab, and
then click [Driver Signing].
Open the Driver Signing
Options dialog box.
4
Make sure that "What action do you want Windows
to take?" is set to "Ignore."
If it is set to "Ignore", simply click [OK].
If it is not set to "Ignore", make a note of the current setting
("Warn" or "Block"). Then change the setting to "Ignore" and
click [OK].
5
close the System Properties dialog box.
Click [OK] to
6
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking
or similar software, be sure to exit it as well.
7
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your
computer.
8
Click the Windows start button. From the menu that
appears, select "Run..."
Open the "Run..." dialog box.
Getting Connected and Installing Drivers (Windows)
If you changed "What action
do you want Windows to
take?" in step 4, you must
restore the previous setting
after you have installed the
➝
driver. ( If you changed
"What action do you want
Windows to take?" (p. 12))
9