Roland Edirol UM-1X Mode D'emploi page 26

Getting Connected and Installing Drivers (Macintosh)
Use the following procedure to install the UM-1X driver.
1
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to
exit this as well.
2
Prepare the CD-ROM.
Insert the CD-ROM into the CD-ROM drive.
3
Double-click the UM-1 Driver-E Installer icon (found
in the Driver E (Mac OS 9, 8) folder of the CD-ROM)
to start up the installer.
4
Verify the Install Location, and click [Install].
fig.05-20e
5
If a message like
the following is
displayed, click
[Continue].
The other currently
running applications will exit, and installation will continue.
6
A dialog box will indicate Installation completed.
Click [Restart] to restart your Macintosh.
26
The indication for the
installation location will differ
depending on your system.
Make sure that the startup disk
for the system you are using is
selected.