Roland Edirol UM-1X Mode D'emploi page 10

Getting Connected and Installing Drivers (Windows)
fig.2-3e_30
9
In the dialog box that
appears, input the
following into the "Open"
field, and click [OK].
D:\Usb_xp2k\SETUPINF.EXE
* The drive name "D:" may be different for your system. Specify the
drive name of your CD-ROM drive.
10
The SetupInf dialog box will appear.
You are now ready to install the driver.
11
Set the UM-1X's ADVANCED DRIVER switch to
the ON position.
* Installation cannot proceed as described below if the switch is
turned OFF.
12
Connect the USB cable of the UM-1X to your
computer.
Near the task bar, your computer will indicate "Found New
Hardware." Please wait.
13
The Found New Hardware Wizard will appear.
Make sure that the screen indicates "EDIROL UM-1 USB
Driver", select "Install from a list or specific location
(Advanced)", and click [Next].
fig.2-7e
14
The screen will
indicate "Please
choose your search
and installation
options."
Select "Don't search. I
will choose the driver to
install", and click [Next].
10
Checking the drive name
Click the Start button, and
from the menu that appears,
choose My Computer. In the
window that appears, note the
drive name of the CD-ROM
drive in which you inserted
the CD-ROM in step 7.
The (D:) or (E:) displayed by
the CD-ROM drive is the
drive name.
If a dialog box other than
"Ready to install the driver"
appears, follow the
instructions shown in the
dialog box.
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.