Roland Edirol UM-1X Mode D'emploi page 18

Getting Connected and Installing Drivers (Windows)
7
Set the UM-1X's ADVANCED DRIVER switch to the
ON position.
8
Connect the USB cable of the UM-1X to your
computer.
9
The driver will be installed automatically.
10
In the SetupInf dialog box, click [OK]. The SetupInf
dialog box will close.
* If a message recommends that you restart Windows, restart
Windows as directed.
Next, you need to make the driver settings.
(➝ Settings and Checking (p. 19))
18
Installation will not occur
correctly if the switch is turned
OFF.
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.