Roland Edirol UM-1X Mode D'emploi page 12

Getting Connected and Installing Drivers (Windows)
18
The Found New Hardware Wizard will appear.
Verify that "EDIROL UM-1 USB Driver" is displayed, and
click [Finish].
Wait until "Found New Hardware" appears near the taskbar.
19
When driver installation has been completed, the
System Settings Change dialog box will appear.
Click [Yes]. Windows will restart automatically.
If you changed "What action do you want Windows to take?"
If you changed the What action do you want Windows to take? setting,
restore the original setting after Windows restarts.
1.
If you are using Windows XP Professional, log on to Windows using
the user name of an administrative account (e.g., Administrator).
2.
Click the Windows start menu, and from the menu, select Control
Panel.
3.
In "Pick a category", click "Performance and Maintenance."
* Depending on how your system is set up, the System icon may be displayed
directly in the Control Panel (classic view). In this case, double-click the
System icon.
4.
In "or pick a Control Panel icon", click the System icon. The System
Properties dialog box will appear.
5.
Click the Hardware tab, and then click [Driver Signing]. The Driver
Signing Options dialog box will appear.
6.
Return the What action do you want Windows to take? setting to the
original setting (either "Warn" or "Block"), and click [OK].
7.
Click [OK]. The System properties dialog box will close.
Next, you need to make the driver settings.
(➝ Settings and Checking (p. 19))
12