Roland Edirol UM-1X Mode D'emploi page 15

If the "File signature verification" setting was not set to "Ignore", a
"Digital Signature Not Found" dialog box will appear.
If "File signature verification" is set to "Warn,"
1.
Click [Yes].
2.
Continue the installation.
If "File signature verification" is set to "Block"
1.
Click [OK].
2.
When the "Found New Hardware Wizard"
appears, click [Finish].
3.
Restart Windows, and then install the driver once again from
step 1 (p. 13).
14
The Insert Disk dialog box will appear.
Click [OK].
15
The Files Needed dialog box will appear.
In the Copy files from field, type the folder name that is
shown in the dialog box, and click [OK].
D:\Usb_xp2k\
* The drive name "D:" may be different for your system. Specify the
drive name of your CD-ROM drive.
16
The "Find New Hardware Wizard" may be displayed.
Verify that "EDIROL UM-1 USB Driver" is displayed, and
click [Finish].
17
The System Settings Change dialog box may
appear.
Click [Yes]. Windows will restart automatically.
If the System Settings Change dialog box does not appear,
restart Windows from the Start menu.
Getting Connected and Installing Drivers (Windows)
The Insert Disk dialog may
not appear. In that case,
proceed to step 15.
15