Windows Xp / 2000 Users - Roland Edirol UM-1X Mode D'emploi

Troubleshooting
Case 6: No sound
◆ Are the USB cable, MIDI cables and audio cables
connected correctly?
Connect the cables correctly.
◆ Are the volume controls of your sound module, audio
system, and application raised?
Check each of the volume controls.
◆ Are the sound module settings correct?
Set the Computer switch of your sound module to the "MIDI"
position .
Case 7: Does not work with Windows 95.
It will not operate on Windows 95.
Case 8: My computer hangs up when I open a MIDI file.
This problem can occur if the USB waveform of your
computer does not sufficiently meet the standards. In this
case, the problem may be solved if you connect the UM-1X via
a USB hub (USB hub containing a power supply).

Windows XP / 2000 users

The latest information is provided in the "Troubleshooting" section of the file
README_E.HTM, located in the Usb_xp2k folder of the UM-1X Driver CD-ROM.
Please refer to the appropriate section.
• Cannot install/uninstall/use the driver
• Cannot select the UM-1 device
• Cannot playback/record
• Part of the playback is wrong: e.g., notes are broken off prematurely, or some
notes are lost
• The "Digital Signature Not Found" or "Hardware Installation" dialog box
appears
• You are asked for the driver file even thought it has already been installed
• Other
Windows 98 / Me users
The latest information is provided in the "Troubleshooting" section of the file
README_E.HTM, located in the Usb_me98 folder of the UM-1X Driver CD-
ROM. Please refer to the appropriate section.
• Cannot install/uninstall/use the driver
• Cannot select the UM-1 device
• Cannot playback/record
• Part of the playback is wrong: e.g., notes are broken off prematurely, or some
notes are lost
34
Before changing the setting of
the computer switch of your
MIDI sound module, be sure
to turn off the power.