Roland Edirol UM-1X Mode D'emploi page 30

Getting Connected and Installing Drivers (Macintosh)
FreeMIDI Settings
1
Set the UM-1X's ADVANCED DRIVER switch to the
ON position.
2
Connect the USB cable of the UM-1X to your
computer.
3
From the CD-ROM, drag the Driver E (Mac OS 9, 8) –
FreeMIDI Setting folder into the FreeMIDI
Applications folder on the hard disk of your
Macintosh to copy it there.
4
Open the FreeMIDI Applications folder from the
location into which you installed FreeMIDI, and
double-click the FreeMIDI Setup icon to start it up.
5
The first time you start up, use the following
procedure.
1.
A dialog box saying "Welcome to FreeMIDI!" will
appear. Click [Continue].
2.
When the FreeMIDI Preferences dialog box appears,
click [Cancel].
3.
When the About Quick Setup dialog box appears, click
[Cancel].
6
From the File menu, choose Open.
7
Select UM-1X USB from the Settings folder you
copied in step 3, and click [Open].
30
Installation will not occur
correctly if the switch is turned
OFF.
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.
When "OMS is installed on
this computer..." appears,
click [FreeMIDI].
If you are unable to select
Open, make settings as
follows.
1. From the File menu, choose
FreeMIDI Preferences.
2. Uncheck "Use OMS when
available."
3. Exit FreeMIDI.
4. Return to step 4 and
continue the procedure.