Roland Edirol UM-1X Mode D'emploi page 11

fig.2-8_20
15
Make sure that the "Model"
field indicates "EDIROL
UM-1 USB Driver", and
click [Next]. Driver
installation will begin.
If the "What action do you want Windows to take?" setting was not set
to "Ignore", a "Hardware Installation" dialog box will appear.
If "What action do you want Windows to take?"
is set to "Warn,"
1.
Click [Continue Anyway].
2.
Continue the installation.
If "What action do you want Windows to take?"
is set to "Block"
1.
Click [OK].
2.
When the "Found New Hardware Wizard"
appears, click [Finish].
3.
Restart Windows, and then install the driver
once again from step 1 (p. 8).
16
The Insert Disk dialog box will appear.
Click [OK].
17
The Files Needed dialog box will appear. Input the
following into the "Copy files from" field, and click
[OK].
D:\Usb_xp2k
* The drive name "D:" may be different for your system. Specify the
drive name of your CD-ROM drive.
Getting Connected and Installing Drivers (Windows)
The Insert Disk dialog may
not appear. In that case,
proceed to step 17.
11