Roland Edirol UM-1X Mode D'emploi page 14

Getting Connected and Installing Drivers (Windows)
7
Exit all currently running software (applications).
Also close any open windows. If you are using virus checking
or similar software, be sure to exit it as well.
8
Insert the CD-ROM.
Insert the CD-ROM into the CD-ROM drive of your
computer.
9
Click the Windows Start button. From the menu that
appears, select "Run..."
Open the "Run..." dialog box.
fig.05-5e_30
10
In the dialog box that
appears, input the
following into the
"Open" field, and click
[OK].
D:\Usb_xp2k\SETUPINF.EXE
* The drive name "D:" may be different for your system. Specify the
drive name of your CD-ROM drive.
11
The SetupInf dialog box will appear.
You are now ready to install the driver.
12
Set the UM-1X's ADVANCED DRIVER switch to the
ON position.
13
Use the USB cable to connect the UM-1X to your
computer.
14
Checking the drive name
Click the Start button, and
from the menu that appears,
choose My Computer. In the
window that appears, note the
drive name of the CD-ROM
drive in which you inserted
the CD-ROM in step 8.
The (D:) or (E:) displayed by
the CD-ROM drive is the
drive name.
If a dialog box other than
"Ready to install the driver"
appears, follow the
instructions shown in the
dialog box.
Installation will not occur
correctly if the switch is turned
OFF.
To prevent malfunction and/
or damage to speakers or other
devices, always turn down the
volume, and turn off the
power on all devices before
making any connections.