Technical Specifications - stayer SCR315W Instructions D'emploi

21.Warning.
The use of any accessory or complement that
differs from the one recommended in this
instructions manual may cause the risk of
personal injuries.
22.Have the tool repaired by qualified personnel.
This electric tool complies with the appropriate
safety requirements. Repairs should be only
carried out by qualified personnel using original
spare parts; otherwise a considerable risk could
be caused to the user.

24.Technical specifications

Article
Model number
SCR315W SCR315W
These data are valid for nominal voltages of [U] 230/240 V ~ 50/60 Hz – 110/120 V ~ 60 Hz. These values may
change of the voltage was lower and in the specific embodiments for certain countries. Pay attention to the
Article No. on the plate of specifications of your apparatus as the commercial denominations of some
apparatus may vary.
Dimensions to be complied with by EN 847 saw blades:
Saw blade diameter: 315 mm
Base blade thickness: 2.5 mm
Bore diameter: 20 mm
Information on noise and vibration
The acoustic levels of the apparatus as determined by an A-filter are: see table
Wear an ear protector!
The typical vibration in hand/arm is less than 2.5m/s²
ENGLISH
50
Absored rpm at
power idling
1.600W 3.000/min
50
Noise K=3dB
Protection
Weight class
35 kg I
L L
pA wA
89 96