Publicité
Les langues disponibles
Les langues disponibles
INSTALLING THE HEATER
Wall mounting:
• The housing of the heater
(1) must be at least 30 cm
from the ceiling, 50 cm
from side-walls and 1.80 m
above the floor.
• The patio heater must be
affixed to a sturdy wall
made of stone or cement.
Never attach to walls made
of wood or other
flammable material! Attach
using the bracket supplied;
do not use any other
supports or attachments!
• Drill four holes in the
correct places for the plugs
and attach the wall support to the wall using the screws. The curved
part of the plate must be uppermost and the 'keyhole' must be located
at the bottom of the support. The wall support must be horizontal.
• Hang the heater onto the wall support. The bracket at the back of the
heater unit must fall into the curved part of the wall support; the
attachment screw (7) must be placed into the round part of the
'keyhole' on the wall support and then pushed gently downwards until
the patio heater is firmly affixed.
• Check that the patio heater is attached firmly and fully horizontally
before use.
PATIO HEATER FUNCTIONS
• Insert the plug into the socket (230V-50Hz).
• The patio heater is switched on and off by pulling on the pull-cord (4).
You also select the power output with the pull-cord. The current setting
can be read out on the setting indicator (3):
O
=
off
L
=
low power
M
=
medium power
9
0 Watt
650 Watt
1350 Watt
Publicité
