Bernette MOSCOW 2 Mode D'emploi page 88

E55-E82e_EN_ES_FR_PT_310309:07_55-90e_EN_ES_FR_PT.qxd
Moscow 2 / 3 / 5 / 7
31.3.2009 14:31 Seite 86
EN GB
Sewing on lace and elastic, darning,
mending, reinforcing edges.
Set the machine as illustrated. Pattern
selector on " ".
Set stitch length control between
"1" - "2".
Set stitch width control between
"3" - "5". (model Moscow 2/3)
Set stitch width control between
"3" - "7". (model Moscow 5/7)
Place patch in position. The stitch length
can be shortened to produce very close
stitches. (1)
When mending tears, it is advisable to use
a piece of backing fabric to reinforce. The
stitch density can be varied by adjusting the
stitch length. First sew over the center and
then overlap on both sides. Depending on
the type of fabric and damage, sew
between 3 and 5 rows. (2)
Please note:
No "S" marking is shown on the stitch
length dial by model Moscow 2/3.
3-step zig-zag