Zippers And Piping - Bernette MOSCOW 2 Mode D'emploi

E55-E82e_EN_ES_FR_PT_310309:07_55-90e_EN_ES_FR_PT.qxd
Moscow 2 / 3 / 5 / 7
31.3.2009 14:31 Seite 82
EN GB
Set the machine as illustrated. Pattern
selector on " ".
Set stitch length control between "2.5"-
"4" (according to thickness of fabric).
Turn the stitch width dial to "0".
The zip foot can be inserted right or left,
depending on which side of the foot you
are going to sew. (1)
To sew past the zip pull, lower the needle
into the fabric, raise the presser foot and
push the zip pull behind the presser foot.
Lower the foot and continue to sew.
It is also possible to sew in a length of
cord, into a bias strip to form a 'welt'. (2)
Please note:
No "S" marking is shown on the stitch
length dial by model Moscow 2/3.

Zippers and piping