Hemmer Foot - Bernette MOSCOW 2 Mode D'emploi

E55-E82e_EN_ES_FR_PT_310309:07_55-90e_EN_ES_FR_PT.qxd
Moscow 2 / 3 / 5 / 7
31.3.2009 14:31 Seite 84
EN GB
Presser foot available as optional accessorie
For hems in fine or sheer fabrics.
Set the machine as illustrated.
Pattern selector on " ".
Set stitch length control between
"2.5" - "4".
Turn the stitch width dial to "0".
Neaten the edge of the fabric. At the
beginning of the hem, turn under the edge
twice by about 3 mm (1/8") and sew 4-5
stitches to secure. Pull the thread slightly
towards the back. Insert the needle into
the fabric, raise the presser foot and guide
the fold into the scroll on the foot. (1)
Gently pull the fabric edge towards you
and lower the presser foot. Begin sewing,
guiding the fabric into the scroll by holding
it upright and slightly to the left. (2)
Please note:
No "S" marking is shown on the stitch
length dial by model Moscow 2/3.

Hemmer foot