Rear Axle - Reely ROAD Blaze Notice D'emploi

d) Rear axle
• The shock absorbers can be mounted at the top (A) and bottom (B) attachment points at different positions.
• The damping characteristics or spring travel of the shock absorber can be modified by adding clips (C).
• The camber can be modified by adjusting the upper transverse control arm using a threaded rod (D).
In addition to the above described adjustment options, you could use different shock absorbers or springs,
and different shock absorber oils with a different viscosity that will influence the springing behaviour.
70
D
C
B
A