Battery Attachments; Rear Spoiler Attachment - Reely ROAD Blaze Notice D'emploi

l) Battery attachments
Install the two battery attachments on the left and the right of the 6 holes in the chassis. For this purpose, use 2
countersunk tapping screws each. The battery pack is later secured with a cross member and two holding clips.
m) Rear spoiler attachment
The rear spoiler attachment is equipped with two pins for the
installation on the body.
Assemble the two side parts and the two adjustable supports as
illustrated. Three plastic bars and 6 tapping screws "A" (thread
length 12 mm) are used to firmly attach the parts to each other.
The assembled support is put onto the rear shock tower and
screwed tight using four long tapping screws "B" (thread length
15 mm).
Attach the provided rear spoiler to the rear spoiler support using
two holding clips.
A
B
The inclination of the rear spoiler can be adjusted by the mechanism integrated in the support.
65