Parkside PTBS 30 A1 Mode D'emploi page 9

Connect the end plugs 5 to
♦
the distributor tubes w at the
points where you do not wish
to connect anything else.
Place the inline drippers 8
♦
near the roots of the plants
to be watered.
Place the shut-off valves 7
♦
where your plants require sep-
arately adjustable water deliv-
ery. You can regulate the water
supply for a single plant or a
whole row of plants separately.
│ GB │ IE
■ 6
♦ Lay out the narrow distributor
tube q and cut it into the re-
quired lengths. Cut the ends of
all distributor tubes q straight.
Connect the T-reducers 4 to
♦
the distributor tubes q.
Connect the inline drippers 8
♦
and the shut-off valves 7 to
the distributor tubes q.
Connect the end plugs 6 to
♦
the distributor tubes q at the
points where you do not wish
to connect anything else.
PTBS 30 A1