Remove The Motor Bracket; Remove Drive Shaft And Insert New Drive Belt - HOLZMANN MASCHINEN TS 250F Mode D'emploi

14.2.3 remove the motor bracket


loosen the screws -circled-

The self-locking nut -white arrow- screw off

The motor mount can now be removed com-
pletely.

14.2.4 Remove drive shaft and insert new drive belt

 Unscrew the nuts by counter holding the saw
blade holder with a wrench
 Remove the disc from the drive shaft
Drive out the ball bearing with a round bar of
the other bearing seat
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
MAINTENANCE AND CARE
 Drive The drive shaft with a mallet gently out
of the bearing seat
 With a round steel can used a metal hammer
Remove the spacer sleeve (1) up and the
drive belt with the pulley (2)
57
TS 250F