Assembly And Operation; Replacing The Saw Blade; Scoring - HOLZMANN MASCHINEN TAS 165 Mode D'emploi

11

ASSEMBLY AND OPERATION

11.1

Replacing the saw blade


Unplug the tool.

Set the function selector(15) to blade replacement.

Press the plunge lock button(1) and press the saw blade down until it clicks into the
replacement position.

Set the plunge saw on its side so that the blade guard faces upwards.

Press the spindle lock(16) in and loosen the locking screw using the Allen key. Remove the
locking screw and outer flange.

Lift the saw blade.

Make sure that there are no chips or sawdust on the spindle and lock screw.

The locking screw has to be lubricated with a drop of acid free oil

Fit in the new saw blade and the other parts in reverse order.

Check that the direction indicated on the saw blade is the same than the direction of
rotation of the motor.

Release the plunge saw lock and let the saw blade return to its start position.
11.2

Scoring


Set the function selector(15) into the scoring position.

Press the on/off button(2) to start the saw.

Press the plunge lock button.
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
ASSEMBLY AND OPERATION
TAS165 / TAS 165PRO
27