Drive Belt Replacement; Dismantling Of The Saw Blade And The Console - HOLZMANN MASCHINEN TS 250F Mode D'emploi

14.2

Drive belt replacement

14.2.1 Dismantling of the saw blade and the console

 Remove the protective plate
INFO: Here the sliding table is not mounted, so
this imaging
Remove the spacer
Remove the console
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
MAINTENANCE AND CARE
CAUTION: Wear protective gloves !
 The saw blade clamping or hold
 Unscrew the nut to the right - Left hand
thread-
Remove the snap ring with snap ring pliers
-outer-
55
TS 250F