Assembly; Residual Risk Factors; Preparatory Activities; Scope Of Delivery - HOLZMANN MASCHINEN MKS 180 Mode D'emploi

Work area and keep soil around the machine clean and free of oil, grease and
residues of material!
Provide adequate lighting in the work area of the machine!
The machine does not use outdoors!
In fatigue, lack of concentration or under the influence of drugs, alcohol or drugs,
the work on the machine is prohibited!
The MKS 180 may only be operated by trained waiting personnel.
Unauthorized persons, especially children, and not trained persons must be kept
away from the running machine!
If you are working on the machine, do not wear loose jewelry, loose clothing, ties or
long hair out.
Loose objects could get caught in the blade and Injury!
When working on the machine type of protective equipment
(Gloves, goggles, hearing protection, ...) wear!
The running machine should never be left unattended! Turn off the machine before
leaving the work area and wait until the machine is at a standstill!
Before maintenance or adjustments, the machine must be disconnected from the
power supply! Switch off the main switch before disconnecting the power (OFF).
Use the power cord never for transport or manipulation of the machine!
1. On the device there are only few of them serviceable components. It is not
necessary to dismantle the machine.
2. Have repairs carried out only by an expert!
3. Accessories: Only use of HOLZMANN Accessories!
4. If you have any questions and problems to our customer service.
In the design of the machine following protective devices are provided:
 Protective cover for the blade
 spark arrester

11.4 Residual risk factors

Even if the machine is used as required it is still impossible to eliminate certain residual risk factors
totally. The following hazards may arise in connection with the machine´s construction and design:
Hearing, unless arrangements have been made by the user for hearing protection.
These risks can be minimized if all safety rules are applied, the machine is properly maintained and
serviced the machine as intended and is serviced by a trained service professional.
Despite all the safety devices and remains her good common sense and your appropriate technical
qualification / training on the operation of a machine such as the MKS 180 of the most important
safety factor!
12

ASSEMBLY

12.1 Preparatory activities

12.1.1 Scope of delivery

After receipt of the delivery, if all parts are in order. Subscribe to cause damage or missing items
immediately to your dealer or the shipping company. Visible damage must also be recorded
without delay in accordance with the provisions of the warranty on the delivery, otherwise the
goods shall be accepted as duly.

12.1.2 The workplace

Choose a suitable place for the
The selected location must ensure an appropriate connection to the electrical

12.1.3 Preparation of the surface

Eliminate the preservative
This can be done with the usual solvents. It no nitro solvent or similar means
water
The use of paint thinners, gasoline, corrosive chemicals or abrasive cleaners will result in
damage to the surface!
HOLZMANN MASCHINEN GmbH
machine; Observe the safety requirements and the
which is applied for corrosion protection of the parts without
N O T E
Therefore: When cleaning, use only mild detergent
www.holzmann-maschinen.at
ASSEMBLY
dimensions.
grid.
painting.
and in no case use
18
MKS180