Changing The V-Ribbed Belt - HOLZMANN MASCHINEN HBS 230HQ Mode D'emploi

15.3

Changing the v-ribbed belt

1.
 Relax the saw blade with the blade tension knob.
2.
 Open the lower saw band cover and remove the bandsaw blade from
the drive shaft.
 WARNING: gloves for the sawblade use !
3.
4.
 Remove the outer retaining ring with the outer retaining ring
pliers.
5.
 Remove the drive roller of the drive
 Replace v-ripped belt and put the drive back to the drive
shaft.
 Attach retaining ring
 Insert v-ripped belt in the desired
 ripped v-belt tension on the engine
 Bandsaw blade on the drive roller
saw band in on good
 saw band tension with
 Close Sawband cover
HOLZMANN MASCHINEN GmbH
3.
Loosen the v-ripped belt on the motor bracket with an
Allen key and relaxing.
shaft.
pulleys.
mount.
hang up
leadership.
knob.
www.holzmann-maschinen.at
Blade tension knob
1.
5.
and check the
MAINTENANCE
2.
4.
HBS 230HQ
44