EUROM TH1800R Manuel D'utilisation page 21

1. expansion bolt M6*70 (2x)
2. wall / ceiling bracket (2x)
3. washer (2x)
4. springwasher (2x)
5. nuts (2x)
6. allen screw M6*10 (2x)
7. suspention bracket (2x)
Installation
 Remove all package material and keep the package material away from children.
 Check the appliance, supply cord and the plug for signs of damage.
 Check that all necessary fastenings material are included.
 Check whether the delivered mounting materials are appropriate, strong enough
and suitable for the surface. The delivered materials are intended for a brick
surface; for mounting on a different type of surface, you should consult a
specialist dealer for the appropriate materials.
 Carefully choose the right spot for installing your infrared heater. The appliance
must be mounted on a non-flammable surface. Furthermore, the surface must
be free of vibrations, completely vertical and strong enough to support the
appliance in the long term without any problems.
 Before mounting, check whether the spot you have chosen complies with the
minimum safety distances from the environment. The distance between the
bottom side of the heater and the floor must be at least 1.8 metre. The distance
8. ON/OFF switch
9. control panel / remote control
receiver
10. philipsscrew M6*8 (4x)
11. allen key (1x)
12. remote controle
21