Inspections And Maintenance - Güde GRT 350 TA Mode D'emploi Original

Troubles-Causes-Troubleshooting
Caution: Always check the overheating fuses first!
Trouble Cause
1.
Will not mow
2.
1.
Will not run

Inspections and Maintenance

Caution! Always make sure that the switch is in OFF position and the mower is unplugged. Do not use running water for
cleaning. Store the unit at a dry place. Wash the protection shield from outside and inside with a wet sponge.
Inspections and Maintenance Safety Instructions
The machine will serve as a sufficient aid only if maintained and care for appropriately. Insufficient maintenance and care may result
in accidents and injuries.
Inspections and Maintenance Schedule
Time Interval Description
After every use
After every use
EU DECLARATION OF CONFORMITY
We, Güde GmbH & Co. KG, Birkichstrasse 6,
74549 Wolpertshausen, Germany
herewith declare that the following appliance complies with the appropriate basic safety and healthy requirements of the EU Directives
based on its design and type, as brought into circulation by us.
In case of alternation of the machine, not agreed upon by us, this declaration will lose its validity.
Machine description:
Rasentrimmer GRT 350 TA/GRT 420 TA
Article No.
#94003
#94008
Applicable EU Directives:
98/37/EC
2004/108/EC
2006/42/EC
Applicable harmonised standards:
EN 55014-1:2006
EN 55014-2/A1:2001
EN 610003-3-2:2006
EN 61000-3-3/A2:2005
EN 60335-1/A13:2008
EN 60335-2-91:2003
EN 62233:2008
Zertifizierstelle:
TÜV SÜD Product Service GmbH
Zertifizierstelle, Ridlerstraße 65, 80339 München, Germany
Referenznummer:
704030905003-01
Date/authorised signature: 18.11.2009
Title of signatory:
Technical documentation: J. Bürkle FBL; QS
string too short
empty reel
interrupted supply
Clean the mower-trimmer thoroughly
Check the reel
Geschäftsführer, Hr. Arnold
Troubleshooting
1. adjust
2. replace
1. plug in and check the cable
23
GB
Other details if
necessary