Inspection And Maintenance Plan - Güde HST 18-0 Traduction Du Mode D'emploi D'origine

Inspection and maintenance plan

Generally
Before any start-up
storage
Failures - Causes - Removal
Failures Causes
Cutting scissors not Battery is discharged
working.
Battery is too cold / hot
Appliance is defective
Internal cables are defective
Unsteady running, Appliance is defective
strong vibrations
Too short duration The battery has not been used for a long
of work per battery time or been used just shortly
charge.
Battery is empty or defective
Whole appliance
Plastic body
Knife/cutter bar
ON/OFF switch
Charger connecting cable
Whole appliance
Regularly clean the outer part
Let regularly checked by authorized workshop
Check for cracks and fissures
Let regularly sharpen
Functional test
Functional test
To be cleaned and the knife bar slightly lubricated.
To be safely stored in a cold room. Have it checked in a
specialised workshop.
Removal
Charge the battery, see the Note to charging
Have the battery warmed up / cooled down
Consult with the customer service centre
Consult with the customer service centre
Consult with the customer service centre
Charge the battery to full extent, see the
Note to charging
Replace (charge) the battery
ENGLISH
23