Safety Warnings - Güde KLS 18-0 Traduction Du Mode D'emploi D'origine

3) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application. The correct
power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles
and grasping surfaces do not allow for safe
handling and control of the tool in unexpected
situations.
4) Battery tool use and care
a) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
c) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
d) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact acci-
dentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help.Liquid ejected
from the battery may cause irritation or burns.
5) Service
Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

Safety Warnings

WARNING! Electric shock! There is a risk of
an injury caused by electric shock!
Check the voltage. Technical data given on the type label
must correspond with electric network voltage.
The compressor must not come into contact with water
or other liquids. In addition, the liquid jet coming out of
the tools connected to the compressor must never be di-
rected at the compressor itself The appliance is live and
electric shocks or short circuits could occur.
Do not operate the appliance barefoot or with wet
hands and feet.
Compressed air is a potentially dangerous
form of energy, therefore it is essential to
exercise caution when using the compressor
and its accessories.
This appliance is not intended for use by persons (inclu-
ding children) with limited physical, sensory or mental
capabilities or insufficient experience and/or knowledge
unless they are supervised by a person who is respon-
sible for their safety or have been instructed by them in
the safe use of the appliance.
Children should be supervised to ensure that they
do not play with the appliance. Instruct children and
unauthorised persons to keep away from the appliance
at all times.
Never operate the compressor unattended.
Never direct the compressed air/liquid jet at people,
animals or yourself.
Never hold the air jet in body orifices, this can cause fatal
injuries!
Keep the work area tidy at all times.
Protective goggles should be worn while using the com-
pressor to protect the eyes from foreign bodies thrown
up by the compressed air jet.
If possible, wear protective clothing when using pneu-
matic accessories.
Always keep a safe distance of at least 4 metres between
the compressor and the work area.
Always carry the compressor by the handle only.
Never leave the appliance exposed to adverse weather
conditions (rain, sun, fog, snow).
Do not use the compressor outdoors in rain or bad
weather!
Do not place flammable objects or objects made of
nylon and fabric near and/or on the compressor.
Do not cover the air intake openings on the compressor.
ENGLISH
17