Fitting The Column - Seca 664 Mode D'emploi

Masquer les pouces Voir aussi pour 664:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
3. Before you start...
Unpacking
– Remove the packaging and place the
scale on a firm, level surface.
The scope of supply includes:
• Weighing platform
• Column with display head
• 2 mounting screws
• 2 serrated lock washers
• 1 Allen key
• 1 screwdriver
• 1 seca mains unit
• 1 set of operating instructions

Fitting the column

The column and display head are fitted to the weighing platform.
– Guide the connecting cable through
the opening.
– Place the column at the intended point
at the end of the rail and tighten up the
screws.
– Now connect the battery pack.
Connecting battery pack
– Carefully get the scale upright so that
the base of the scale is accessible.
– Connect the connecting cable from the
column to the electronics box.
– Undo the screws of the battery com-
partment and take off the cover.
– Connect the plug contacts to the batte-
ry pack inside.
– Close the cover and then turn the scale
back up the right way.
Model 664
15
GB

Publicité

Table des Matières
loading

Table des Matières