Fitting The Right-Hand Handrail Support - Seca 645 Mode D'emploi Et Garantie

Fitting the right-hand
handrail support
80 •
You need the following connecting elements for this
assembly step:
3 x hex socket head screws, M 5 x 12
1. Hold the right-hand handrail support in position on
the weighing platform as shown in the diagram
above.
2. Attach the handrail support to the weighing
platform with two hex socket head screws.
3. Attach the triangular brace to the weighing platform
with one hex socket head screw.