Assembling The Device; Fitting The Column - Seca 665 Mode D'emploi

4.2 Assembling the device

Fitting the column

68 •
You need the following connecting elements for this
assembly step:
2 x hex socket head screws
1. Route the display cable so that it cannot get
trapped when you fit the handrail.
2. Place the column against the handrail as shown in
the diagram above.
3. Put one serrated lock washer on each of the
screws.
4. Put the screws in the bores on the handrail and the
column.
5. Tighten the screws.
2 x serrated lock
washers