Seca 664 Mode D'emploi page 14

1. Congratulations!
English
In the seca 664 electronic wheelchair sca-
le, you have purchased a high-precision
yet sturdy piece of equipment.
seca has been putting its experience at
the service of health for over 150 years
now, and as market leader in many coun-
tries of the world, is always setting new
standards with its innovative develop-
ments for weighing and measuring.
In accordance with national regulations, the
seca 664 electronic wheelchair scale is
used primarily in hospitals, doctors' surge-
ries and in-patient nursing facilities.
The weight display can be switched bet-
ween kilogrammes (kg), pounds (lbs) and
stones (sts). Weight is determined within a
few seconds.
2. Safety
Before using the new scale, please take a little time to read the following safety instruc-
tions.
• Follow the instructions in the instruc-
tions for use.
• Keep the operating instructions and the
declaration of conformity in a safe pla-
ce.
• Do not drop the scale or subject it to
violent shocks.
• Lay the scale carefully in its position for
use.
• Secure the scale so that it does not fall
over when stored in the upright positi-
on.
14
You can use the pre-Tare function to
record the weights of, e.g. three types of
wheelchairs. This weight is automatically
deducted in the weighing operation.
The two fold-away ramps allow the
wheelchair-user to get on and off in com-
fort.
The fold-away column allows the scale to
be stored upright to save space.
The scale is of a very sturdy construction
and will give you long and loyal service. It
is easy to operate and the large display is
easy to read.
The seca 664 can be moved on castors
and its low power consumption combined
with its rechargeable batteries mean it will
provide long, mobile service.
• When moving the scale in the upright
position, ensure that it does not fall
over.
• Be sure to use only the seca mains unit
supplied. Before plugging the mains
unit into a socket, check that the mains
voltage indicated on the mains unit
matches local mains voltage.
• When using the scale with a mains unit,
ensure that the supply cable is routed in
such a way as to exclude any type of
tripping hazard.
• Have repairs carried out only by autho-
rised persons.