Before You Get Started; Removing The Locking Pin; Removing The Transport Lock; Fitting The Wall Spacer - Seca 761 Mode D'emploi Et Garantie

4. BEFORE YOU GET STARTED ...

4.1 Removing the locking pin

Click!

4.2 Removing the transport lock

4.3 Fitting the wall spacer

1. Turn the locking pin on the base of the housing a
quarter-turn anticlockwise.
2. Take out the locking pin.
NOTE
Keep the locking pin for transporting the scale
at a later date.
►
Remove the transport lock from the lower section
of the housing.
NOTE:
►
Put the transport lock in a safe place for sub-
sequent transport of the scale.
►
You can use the transport lock as a wall
spacer (see section "Fitting the wall spacer").
If you wish to position the scale close to a wall, we
recommend using the transport lock (see section
"Removing the transport lock") as a wall spacer. This
stops the weighing platform from touching the wall and
the measured result from being incorrect.
Before you get started ... • 31
English