Temperature Measurement Modes; Description Of Temperature Operation - Schiller Argus VCM Mode D'emploi

ARGUS VCM

Temperature Measurement Modes

Temperature measurements can be made in two modes:
PREDICTIVE mode
is a one-time measurement that takes only a few seconds. It results in a single
temperature reading which is displayed at the end of the brief measurement period.
MONITORED mode
is a continuous measurement over an indefinite period. The current temperature
displayed dynamically throughout the measurement period.

Description of Temperature Operation

Setting the Temperature Measurement Mode
For the setting the Temperature measurement mode, you may refer to page 29, of this
manual.
1. Press the Mode button 3 times until the Temperature units and modes are on (a
selected unit/mode is shown flashing).
2. Select desired temperature unit and mode, using the Up/Down (+/-) selection
buttons.
Note: If there is no activity for 3 seconds, the monitor will return to normal operation.
Table 6. Indication of Temperature Measurement Mode
Indication
Temperature Monitoring
Temperature Mode
Celsius Predictive
Celsius Monitored
Fahrenheit Predictive
Fahrenheit Monitored
Operator's Manual
ARGUS VCM
49