Table des Matières
Publicité
GAKS 350 E
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Symbols
Caution!
Read the Operating Instructions!
before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Wear eye protection !
Wear ear protectors!
Wear protective helmet !
Wear protective gloves !
Wear safety cut through resistant shoes
with safety sole and steel toe !
Wear protective clothing with cut through
resistant ply !
In case of cable damage or nock, immedi-
ately pull out plug from socket
Warning against dangerous kickback.
Warning against bounced subjects
Keep distance of persons
Observe to keep out of dangerous zone
Electrical hazard , keep at least 10 m
distance away from electrical power lines.
Cable pulling / transport prohibited.
Protect against humidity
Never expose tool to rain.
Rotation direction of the saw chain
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against humidity
This side up
General Power Tool Safety warnings
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
warnInG
read all safety warnings and all instructions. Failu-
re to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
1) work area safety
a) Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
EnGlISH
23
Publicité
Table des Matières
