Starting / Stopping The Engine - Stihl SR 430 Notice D'emploi

Throttle trigger limiter position
Travel of throttle trigger can be limited in
two stages:
a
1
a 1/3 throttle
b 2/3 throttle
To disengage the travel limiter,
Return the setting lever (1) to the
N
run position F.
1)
Throttle lock
2
The throttle trigger (2) can be locked in
any required position.
To disengage the lock:
Return the setting lever (1) to the
N
run position F.
1)
Not in all versions, country-specific
SR 430, SR 450
1)
Starting / Stopping the
Engine
Before Starting
b
Close valve lever (1) for solution
N
feed.
Additionally on SR 450:
1
Close the metering lever (2) for
N
dusting and spreading mode.
Starting the Engine
Observe safety precautions.
N
NOTICE
Start your unit on a clean, dust-free
surface only to ensure that no dust is
sucked in.
1
The setting lever must be on F
N
Press the manual fuel pump
N
bulb (3) at least five times – even if
the bulb is filled with fuel.
2
Cold engine (cold start)
Press in the choke knob (4) and turn
N
it to c.
English
L
H
LA
4
15