Stihl SR 430 Notice D'emploi page 12

English
4 3 2
Push the ring seal (3) (wide lip
N
facing left) onto the stub on the
blower tube (2).
Push the pleated hose (4) over the
N
ring seal (3).
1
4
5
Push the hose clamp (1) onto the
N
pleated hose (4).
Line up the marks on the hose
N
clamp (1) and blower tube (2) – as
shown.
Secure the hose clamp (1) with the
N
screw (5) – the blower tube (2) must
still rotate.
10
Fitting the pleated hose on the elbow –
SR 430 only
2
Push narrow hose clamp (1), marks
N
facing left, onto the elbow (2).
Push the pleated hose (3) onto the
N
elbow (2).
2
1
3
1
2
4
2
4
1
Push the hose clamp (1) onto the
N
pleated hose (3).
Line up the marks on the hose
N
clamp (1) and elbow (2) – as shown.
Secure the hose clamp (1) with the
N
screw (4).
SR 430, SR 450
3