Mounting The Kombitool; Starting / Stopping The Engine - Stihl BG-KM Mode D'emploi

Masquer les pouces Voir aussi pour BG-KM:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

Mounting the KombiTool

Mounting the KombiTool
1
2
4
Push the lug (1) on the drive tube
N
into the slot (2) in the coupling
sleeve as far as stop.
A
3
When correctly mounted, the intake
screen (3) must be flush with the
coupling sleeve (gap 'A' no more than
5 mm).
Tighten down the wing screw (4)
N
firmly.
Removing the KombiTool
Reverse the above sequence to
N
remove the KombiTool.
6
Starting / Stopping the
Engine
Starting the Engine
Always follow the operating instructions
for the KombiEngine and basic power
tool.
NOTICE
Start your machine on a clean surface
only to ensure that no dust is sucked in.
Place the machine securely on the
N
ground and make sure that
bystanders are well clear of the
nozzle outlet.
Make sure you have a firm footing,
N
either standing, stooping or
kneeling.
Hold the machine with you left hand
N
and press it down firmly – do not
touch the controls on the control
handle – see KombiEngine or basic
power tool instruction manual.
NOTICE
Do not stand or kneel on the drive tube.
The starting procedure is now as
described in the instruction manual of
the KombiEngine or basic power tool
you are using.
Stopping the Engine
See KombiEngine or basic power
N
tool instruction manual.
BG-KM

Publicité

Chapitres

Table des Matières
loading

Table des Matières