Address Configuration; Advanced Settings - Comelit 1454 Manuel D'utilisation

Address configuration

` Click to access the "SETTINGS" menu.
` Click to access address configuration.
The first time you access the address configuration, key programming and call configuration areas, you will
be asked to enter a password: the default password is 0000 (to set a new password, see page 33 for
instructions).
` Enter the password and click
` Click to display the configurations without the possibility of modifying them.

Advanced settings

` Assign a ViP address to the software.
VIP address: Each system device must be programmed with a different code, called the ViP
address. The ViP address is an 8-digit code identifying each extension and can be entered
as desired, without following any pre-set sequence. However, we recommend using a logic
diagram to keep track of the addresses entered.
A logic diagram (optional) for entering the ViP address is provided below.
Example: Building/staircase/floor/apartment
01041156 • 00021022 • 01001223 • 01030009 • 00000012
` Select either "Master" or "Slave 1/.../15".
Master: by Master we mean the main monitor in an apartment. Every Master monitor in
the system must have a different ViP code. The Master monitor manages all external unit /
switchboard / intercom calls. It is essential that, in an apartment, one of the monitors is set as
a Master.
Slave: by Slave we mean one or more secondary monitors (MAX. 15) in an apartment. Every
Slave has the same ViP address as the Master monitor, but is identified with a unique number
to differentiate it from the other slave monitors.
For Kit 8501, 8501HIM, 8501I, 8501IM, 8501U, 8503, 8504 and 8504H, the ViP ad-
dress is set to 00000001 "Master" by default.
to access set/modify configurations.
32