Gtec SATURN Série Manuel D'installation page 117

UPS Models
BATTERY CHARGER STAGE
Nominal voltage
(6)
Maximum recharge current
Battery charger algorithm
Technology
Input voltage tolerance for recharging at
maximum current
MODES AND EFFICIENCY
Operating modes
AC/AC performance in on line mode
AC/AC performance in Eco mode
OTHER FEATURES
Noise
Colour
(7)
Ambient temperature
(1)
@ 100% load & THDv ≤ 1%
(2)
In order to keep the output voltage within the indicated precision range, a recalibration may be necessary, following a long period of use.
(3)
If the mains frequency is within ± 5% of the selected value, the UPS is synchronised with the mains. If the frequency is out of the tolerance
range, or in battery operation, the frequency will be the selected +0.01%
(4)
Mains/Battery @ 0% -100% load
(5)
@ Mains / battery / mains @ 0% / 100% / 0% resistive load
(6)
The recharge current is adjusted automatically, depending on the capacity of the battery installed.
(7)
20 – 25 °C for a longer battery life
30kVA
240Vdc
10A
Two levels with temperature compensation
Analogue switching current under P control
(PWM voltage and charge current adjustment)
345-480Vac
True on line double conversion
ECO mode
Smart Active mode
Stand By Off (Emergency)
Frequency Converter (with batteries)
Up to 96.5%
 99%
≤ 48dB(A)
RAL 7016+ RAL 7012 (door central area)
0 – 40 °C
117
40 kVA