Epson V12H949001 Instructions D'installation page 8

V12H949001 / AN3WA100
4. Mark four locations for projector mount wall bracket (U)
attachment over studs. (See Figure 3)
NOTE:
For wood or steel stud walls, mark at least two locations
over studs for attachment a minimum of 16" apart and
a maximum of 24" apart.
NOTE:
For concrete walls, mark at least two locations for
attachment a minimum of 16" apart.
5. Drill one pilot hole (see Table 1 for size) at each location
marked in Step 4 (See Figure 3) and follow fastener
information (appropriate for wall type) located in Table 1.
IMPORTANT ! : Refer to Fastener Installation Methods
(located in Appendix at end of Installation Instructions)
for details on installing product into various wall types.
(front view)
4
(U)
Figure 3
6. Install four fasteners appropriate for wall type (See Table 1)
through outer holes of projector mount wall bracket (U), into
pilot holes, and tighten. (See Figure 4)
6
Fasteners x 4
(U)
Figure 4
8
5 x 4
Table 1: Fastener Information
WALL PILOT
TYPE HOLE
Steel
1/2"
studs
Wood 7/32"
stud
Concrete
5/16 x 3-1/4"
Installing Screen Mounting Bracket
IMPORTANT ! : The distance between the screen
mounting bracket (T) lower mounting holes and the
projector mount wall bracket (U) mounting holes varies,
and is dependent upon whether the projector is a lamp
model or laser model. See Installation Template and
(See Figure 5).
(U)
16" or 17"
(See Table 2 for specific
projector information)
Figure 5
Table 2: Epson Projector Mount Height Spacing
Projector Model
Brightlink® Pro 1450Ui
Brightlink® Pro 1460Ui
Brightlink® Pro 1470Ui
Brightlink® 697Ui
Brightlink® 696Ui
Brightlink® 710Ui
Installation Instructions
FASTENERS (see PARTS
drawing)
1/4-20 Toggler anchor kit (B1, B2,
B3)
- 1/4-20 x 1-3/4" Phillips screw (B2)
- 1/4" washer (B3)
- 1/4-20 Snap toggler (B1)
- 5/16 x 2-1/2" hex head lag (A1)
- 5/16" washer (A2)
- 5/16 x 2-1/2" hex head lag (A1)
- 5/16" washer (A2)
- Fischer Anchor UX10x60R (A3)
(T)
Distance Between Mount
Bracket Lower Mounting Holes
and Screen Mounting Bracket
16 in (406 mm)
16 in (406 mm)
17 in (432 mm)
16 in (406 mm)
16 in (406 mm)
17 in (432 mm)