Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions
Image Alignment
Using remote control included with projector:
1.
Press POWER button on the remote control or projector
control panel. (See Figure 15)
Remote Control
Figure 15
2.
Press MENU button on the remote or projector control
panel. (See Figure 16)
Remote Control
Figure 16
3.
Select EASY INTERACTIVE FUNCTION from the
EXTENDED menu. (See Figure 17)
Figure 17
4.
Select TOUCH UNIT SETUP. (See Figure 18)
Figure 18
Control Panel
Control Panel
5.
Select INSTALLATION PATTERN. (See Figure 19)
Figure 19
6.
The installation pattern is displayed on the projected image.
(See Figure 20)
NOTE:
Use the center mark on the top frame of screen (red
tape at top of frame) to line up with vertical line at center
of pattern. (See Figure 20)
Figure 20
Focus the Image
1.
Slide the air filter cover latch. (See Figure 21)
2.
Open the air filter cover. (See Figure 21)
1
Latch
Figure 21
V12H949001 / AN3WA100
Air filter cover
2
13
Publicité
Table des Matières
