Product Features; Technical Data - CST/BERGER RL25H Notice Originale

Product Features

The numbering of the product features shown refers to the illus-
tration of the measuring tool on the graphic page.
(see pages 3 – 6)
1 Reception lens for remote control
2 On/Off button
3 Automatic levelling indicator
4 Button for rotational operation and selection of the
rotation speed (RL25HV)
5 Button for line operation and line length selection
(RL25HV)
6 Charge-control indicator
7 Shock-warning indicator
8 Shock-warning button
9 Lower direction button
10 Upper direction button
11 Indicator for single-axis slope operation
12 Button for single-axis slope operation
13 Exit opening for laser beam
14 Variable laser beam

Technical Data

Rotational Laser Level
Article number
Working range (radius)
– without laser receiver, approx.
– with laser receiver, approx.
1) 2)
Levelling Accuracy
Self-levelling range, typically
Levelling duration, typically
Rotational speed
Aperture angle for line operation
Operating temperature
Storage temperature
Relative air humidity, max.
Laser class
Laser type
Laser beam Ø at the exit opening, approx.
Tripod mount (horizontal)
Batteries (NiMH)
Batteries (alkali-manganese)
Operating time, approx.
– Batteries (NiMH)
– Batteries (alkali-manganese)
Weight according to EPTA-Procedure 01/2003
Dimensions (length x width x height)
Degree of protection
1) at 20 °C
2) alongside the axes
3) The operating duration depends on the characteristics of the batteries/rechargeable batteries being used and can vary with different manufacturers.
The measuring tool can be clearly identified with the serial number 21 on the type plate.
800.561.8187
28 | English
1)
3)
www.
15 Plumb beam (RL25HV)
16 Battery compartment
17 Socket for charge connector*
18 Battery pack*
19 Nut for battery compartment/battery pack
20 Tripod mount 5/8"
21 Serial number
22 Laser warning label
23 Laser receiver
24 Construction laser measuring rod*
25 Tripod*
26 Remote control*
27 Laser viewing glasses*
28 Wall mount/alignment unit*
29 Laser target plate*
30 Case
31 Battery charger
32 Charge connector
* The accessories illustrated or described are not included as stand-
ard delivery.
RL25H
F 034 K61 0NF
±0.08 mm/m
±8 % (±5°)
600 min
–10...+50 °C
–20...+70 °C
635 nm, <1 mW
5/8"-11
2 x 1.2 V HR20 (D) (9 Ah)
3 x 1.5 V LR20 (D)
200 x 220 x 190 mm
IP 56 (protected against dust
and powerful water jets)
information@itm.co
.com
F 034 K61 0N6
30 m
225 m
±0.08 mm/m
±8 % (±5°)
15 s
-1
150/300/600 min
– 10/25/50°
–10...+50 °C
–20...+70 °C
90 %
2
635 nm, <1 mW
5 mm
2 x 1.2 V HR20 (D) (9 Ah)
3 x 1.5 V LR20 (D)
30 h
85 h
2.3 kg
200 x 220 x 190 mm
IP 56 (protected against dust
and powerful water jets)
2 609 141 178 • 2.4.14
RL25HV
30 m
225 m
15 s
-1
90 %
2
5 mm
5/8"-11
30 h
55 h
2.3 kg