Programming; Programming Overview - Schaerer Siena-2 Mode D'emploi

6

PROGRAMMING

Your coffee machine is pre-programmed at the factory for ideal
results. However, you have the possibility to program the unit
according to your individual preferences.
The following elements can be programmed in regard to the
product (see also Programming overview):
Water Quantity - Coffee Quantity - Preinfusion function
In addition, you can also individually program various functions
of the machine.
Notes:
• If no entry is made during the course of the programming, after
30 seconds the machine automatically switches to the next
programming step, or to the "Ready" mode.
Select product button
Machine without cappuccino
Machine with cappuccino
+0% ###
Meter water quantity with +/-
+0% #.## s
Meter coffee quantity with +/-
Preinfusion ON
Switch on/off with +/-
Ready
End of programming
Machine with Cappuccino
+ 0% ##
Meter water quantity with +/-
+ 0% #.## s
Meter coffee quanity with +/-
Preinfusion ON
Switch on/off with +/-
+ 0% #.## s
Measure milk quantity with +/-
Coffee->Milk
Set coffee-milk order with
+/-
Bereit
End of programming
BASL - 02 - V01
General settings
English
Select language with +/-
Temp. 86°C
Select brewing temperature
with +/-
Standby 1 h
Select time until standby mode
with +/-
Buzzer EIN
Switch warning signal on/off
with +/-
++4131 8585111
Telephone no. for service
support
Ready
End of programming
Machine with cappuccino
+0% #.## s
Measure foam quantity with +/-
Ready
End of programming
Machine with cappuccino
+0% #.## s
Meter water quantity with +/-
Ready
End of programming
• Running through the programming by means of the program-
ming button is only possible in a forwards direction; back-
wards movements cannot be effected.
• Machine programming at the
by means of a personal PIN code.
• Your customer adviser will be pleased to answer your ques-
tions and to advise you on more extensive programming.
6.1

Programming overview

Ready
Product, 2x, C
Select program level
Product settings
Code
Counter status
Keylock
Descaling
Prog.prod.
Prog. sys.
Counter
Descaling
Change price
Acc. syst.
Change code
Factory set.
Ready
User manual
level can only be executed
Access code: Select each digit
0000
using +/- and confirm with
Reset to 0 with
Lock individual product buttons
with +/-
ON
Enable descaling with +/-
ON Enable key re-programming
with +/-
ON
Enable programming of general
settings with +/-
ON Switch meter display for the
dispenser keys on/off with +/-
OFF Setting the decalcification
values with +/-.
Amend product price with +/-
(only with coin slot)
ON
Switching on/off the coin accep-
tor unit with +/- (only with coin
slot)
New code: set each digit with
+/- and confirm with
Reset the coffee machine with
+ to the factory settings (Cancel
with ).
End of programming
Page 47
UK