Product Information; Data Plate; Type Key; General Description - Wilo SCP Série Notice De Montage Et De Mise En Service

5 Product information

5.1 Data plate

Split case pump
Typ
S/N
Q
T
min
IM
[-
Article no.:
Made by Wilo Group in Germany
WILO SE Nortkirchenstr. 100
44263 Dortmund Germany
valid within the EU and Russia for pump types with IE3 motors of
0.75 kW to 375 kW and with IE2 motors larger than 375 kW
Split case pump
Typ
S/N
Q
T
min
IM
[-
Article no.:
Made by Wilo Group in Germany
WILO SE Nortkirchenstr. 100
44263 Dortmund Germany
valid outside the EU
Property
Speed
Discharge nominal diameters DN
Flange standard
Limit of fluid temperature (min./max.)
- Mechanical seal version [°C]
-Gland packing version [°C]
Limits of ambient temperature (min./max.) [°C] -16 up to +40
Ambient humidity
Max. operating pressure
Motor insulation class
Motor protection level
Electrical protection for motor
Acoustic pressure level, (In accordance with
motor performances)
Standard fluid allowed
Electrical connections
Installation and operating instructions Wilo-SCP
H n
T p
max min
M p
hydr. max
X
-] MFY
Vor dem Öffnen Pumpe ausschalten
Do not open when switched on
TAG-No.:
H n
T p
max min
M p
hydr. max
X
-] MFY
Vor dem Öffnen Pumpe ausschalten
Do not open when switched on
TAG-No.:

5.2 Type key

SCP200/250HA-110/4/T4-R1/E0
SCP
200
250
HA
110
4
T4
R1
E0

5.3 General description

Limits of usage of the standard range
The technical features of the product have been
described in the offer made for this product, espe-
cially the fluid compatibility. Please refer to this:
Value
2900, 1450, 980 1/min
50 up to 400
PN 16/25
-8 up to +120
-8 up to +105
< 90 %
16 bar, generally
F
IP 55
–
Central heating liquid in accordance
with VDI 2035, cooling water.
Cold water
Mixture water/glycol up to 40 % of
volume. Temp ≤ 40 °C for concentra-
tions between 20% and 40% vol.
Contact WILO for all other fluids
3~230V, 50Hz (≤4kW)
3~400V, 50Hz (≥5,5kW)
Name of the range
Discharge flange nominal diameter
in mm
Nominal diameter of the impeller in mm
Type of Hydraulic :
- HA = Standard type version A
- HB = Standard type version B
- HS = Single suction impeller
- DV = Double volute
- DS = Double stage
Motor power rating in kW
Number of poles
Voltage Three phases 400V
Material configuration : Casing in cast
iron, Bronze impeller, Stainless steel
shaft (RoHS compliant)
Mechanical seal material configuration
Carbon / SiC EPDM type AQ1EGG
Remarks
Model dependent
ISO 7005-2, as needed
other on request
other on request
25 for some models
other on request
Required in place (in accord-
ance with local regulation)
Refer to the data plate on the
motor on in technical leaflets
Standard version
Standard version
Only for special version
Other frequency, voltages,
please contact WILO
English
49