Medela Invia Liberty Mode D'emploi page 28

28
7. Unpack new canister tubing and connect to Invia Liberty pump.
Insert the tubing base into the pump (straight push).
8.1 Unpack new canister and remove the safety sticker.
8.2 Slip the pegs at the bottom of the canister into the slots at the
base of the pump. Lift the canister towards pump until it clicks
into place.
8.3 Connect the canister tubing to dressing tubing. Ensure that the
tubing is un-clamped.
8.4 Press "ON" with [
9. Dispose canister and canister tubing in accordance with local
procedures. In the home care setting, return disposables to care
giver for correct disposal.
]. Pressure will begin to built up.