Installation - Animo Excelso Mode D'emploi

Excelso
WARNING
• Always remove the plug from the socket if the machine has to be opened
for repair or maintenance.
• Do not position the machine in areas where the temperature drops below
freezing point because there is always water left in the system.
• Always plug the machine into an earthed wall socket.
• Do not submerge or spray the machine.
• Have all repairs carried out by a specially trained technician.
• Make sure that the mains cable does not come into contact with the hot plates
(when present) which become extremely hot when is use.

3. INSTALLATION

only suitable for indoor use

not suitable for use in humid areas

not suitable for areas with explosion hazard

Preparation for positioning
Place the appliance at buffet height on a firm, level base that can withstand the weight

of the machine when filled.
Make sure that the appliance is level and placed somewhere where it will not cause

damage should leakage occur.
The power connection must be within half a metre of where the machine is positioned.

Unpacking
The machine has been carefully packed to prevent damage being caused to your new appliance.
Remove the packing carefully without using sharp objects. Check if the appliance is complete.
To protect the stainless steel parts from scratches these surfaces are temporary protected
by a foil. This foil must be removed during installation.
The appliance is delivered with the following accessories:
Basket filter 90/250
Glass jug 1.8 L
Thermos jug 2.0 L
Water measuring cup
This manual
Please contact your dealer in case parts are missing or damaged.
2015/02 Rev. 2.0
Excelso Tp Excelso T
1
-
-
1
1
13
Excelso
1 1
- 1
1 -
- -
1 1
GB