Technical Data - HYDAC ELECTRONIC HDA 7400 Notice D'utilisation

8

7. TECHNICAL DATA

Input data
Measuring ranges
Overload pressure
Burst pressure
Mechanical connection
Torque rating
Parts in contact with media
Output data
Output signal,
permitted resistance
Accuracy to DIN 16086,
max. setting
Accuracy at min. setting
(B.F.S.L.)
Temperature compensation
zero point
Temperature compensation
over range
Non-linearity at max. setting
to DIN 16086
Hysteresis
Repeatability
Rise time
Long-term drift
Ambient conditions
Compensated temperature range
Operating temperature range
Storage temperature range
1)
Fluid temperature range
- mark
2)
- mark
Vibration resistance to
DIN EN 60068-2-6 at 10 ..500 Hz
Protection class to DIN 40050
Other data
Supply voltage
For use acc. to UL spec.
Residual ripple of supply voltage
Current consumption
Life expectancy
Weight
Note
Reverse polarity protection of the supply voltage, excess voltage, override and short circuit protection are provided.
FS (Full Scale) = relative to the full measuring range
B.F.S.L. = Best Fit Straight Line
1) -25°C with FPM seal, -40°C on request
2) Environmental conditions according to 1.4.2 UL 61010-1; C22.2 No. 61010-1
All details in this brochure are subject to technical modifications.
Stand: 18.03.2013
1)
HYDAC ELECTRONIC GMBH
40; 60; 100; 250; 400; 600 bar
80; 120; 200; 500; 800; 1000 bar
200; 300; 500; 1000; 2000; 2000 bar
G1/4A DIN 3852
20 Nm
Fitting: Stainless steel
Seal: FPM
4 .. 20 mA, 2 conductor
R = (U – 8 V) / 20 mA [kΩ]
Lmax B
0 ..10 V, 3 conductor
R = 2 kΩ
Lmin
≤ ± 0.5 % FS typ.
≤ ± 1 % FS max.
≤ ± 0.25 % FS typ.
≤ ± 0.5 % FS max.
≤ ± 0.015 % FS / °C typ.
≤ ± 0.025 % FS / °C max.
≤ ± 0.015 % FS / °C typ.
≤ ± 0.025 % FS / °C max.
≤ ± 0.3 % FS max.
≤ ± 0.4 % FS max.
≤ ± 0.1 % FS
≤ 2 ms
≤ ± 0.3 % FS typ. / year
-25 .. +85 °C
-40 .. +85 °C / -25 .. +100 °C
-40 .. +100 °C
-40 .. +100 °C /-25 °C .. +100 °C
EN 61000-6-1 / 2 / 3 / 4
Certifikate-No.: E318391
≤ 20 g
IP 67 (M12x1, when an IP 67 connector is used)
8 .. 30 V DC 2 conductor
12 .. 30 V DC 3 conductor
-limited energy- according to
9.3 UL 61010,Class2;
UL 1310/1585;LPS UL 60950
≤ 5 %
< 25 mA
> 10 million load cycles
0 .. 100 % FS
approx. 60 g
HDA 7446
Mat. Nr.: 669789 D/E/F