Compliance Information - Henny Penny LVG-102 Manuel D'utilisation

Compliance Information

These are the original version controlled Henny Penny instructions for Low oil Volume Gas (LVG)
model 10 number of vats 2 (LVG-102/103/104). Read these instructions completely prior to installation
and operation of this appliance to ensure compliance to all required installation, operation and safety
standards. Read and obey all safety messages to avoid damage to the appliance and personal injury. This
appliance is intended for commercial use in kitchens of restraunts, bakeries, hospitals, etc. but not for the
continuous mass production of food such as in a factory setting. This fryer must be installed and used
in a way that water does not contact the oil which can cause splashing and boiling over of oil and steam
leading to personal injury; excludes normal product moisture. Proper daily, weekly, monthly, quarterly and
yearly maintenance must be performed on this appliance to ensure safe and continuous operation. Proper
maintenance also increases the usable life of the appliance and oil, which reduces lifetime operating costs.
Additionally, old oil increases the possibility of surge boiling and fire due to the reduced flash point of the
oil. This appliance must never be cleaned with a water jet or steam cleaning tool. Cleaning brushes are
shipped with the appliance and proper cleaning instructions are included in this manual.