Section 3 Installation
3.1 Mounting
W A R N I N G
Personal injury hazard. Removal of a sensor from a pressurized vessel
can be dangerous. Installation and removal of these sensors should be
done by individuals trained in proper high pressure and temperature
installation. Always use industry approved hardware and safety
procedures when dealing with high pressure and/or temperature fluid
transport systems.
Figure 2 Mounting examples (1)
1 Sanitary mount
2 Union mount
6 English
For examples of sensors in different applications, refer to
Figure
3. The sensor must be calibrated before use. Refer to
the sensor
on page 12.
3 Flow-through mount
4 Flow-through mount—LCP sensor
Figure 2
and
Calibrate