Grizzly GHS 2842 B Traduction De La Notice D'utilisation Originale page 79

- Before moving or lifting the
shredder
- If foreign objects should en-
ter the shredder, if the shred-
der is making unfamiliar
noises or vibrations (check
the shredder for damage be-
fore starting it up again)
• Do not allow shredded material
to accumulate near the ejection
area. This may otherwise hin-
der proper ejection and force
the material back up through
the feeder.
• Do not transport or tip the shred-
der with the motor running.
• Keep hands, other body parts
and clothing out of the filling
chamber and ejection channel
and away from other moving
parts.
• In the event of blockages in
the machine intake or ejec-
tion, switch off the motor and
disconnect the machine from
the mains before removing
leftover material in the intake
opening or ejection channel.
Ensure that the motor is free of
rubbish and other accumula-
tions in order to safeguard the
motor from damage or possible
fire. Remember that the cutting
tool is also activated when the
starting mechanism is started
on a motor operated machine.
CAUTION! The following
states how damage to the
trimmer and possible injury
to people can be avoided:
• Handle the unit with care.
Clean the ventilation slits regu-
larly; keep to the maintenance
instructions.
• Do not overload your device.
Work only within the indicated
range of performance. Do not
employ any low power ma-
chines for heavy work. Do not
use your device for purposes
for which it has not been de-
signed.
• Only switch the shredder off
once the funnel feeder is com-
pletely empty since the shred-
der may otherwise clog up and
not be able to start afterwards.
• Do not attempt to repair the
shredder yourself unless you
are qualified to do so. Any
work not specified in this man-
ual may only be carried out by
our service centre.
Electrical safety
CAUTION! The following
states how to avoid acci-
dents and injuries due to
electric shock:
• Use the tension relief provided
for the fixing of the extension
cord.
• Damaged cables, coupling and
plugs or connecting leads not
corresponding to specifica-
tions, must not be employed.
Remove the plug immediately
from the plug socket in case of
damage to the mains cable.
Do not touch the mains power
supply cable under any cir-
cumstances until you have
pulled the plug out of the mains
socket.
GB
79